Whole House Siding Replacement in Traverse City: A Full Exterior Walkthrough

whole house siding replacement

Contact Us Now

visit social platform's :

From the backyard, this home looks almost new. Soft gray lap siding runs straight and even across two stories. Crisp white trim frames every window, door and corner. The soffit, fascia and gutters line up cleanly along each roofline. Nothing looks patched or pieced together.

That’s the goal of a whole house siding replacement. It isn’t just a color change. It’s a chance to fix every weak spot in your home’s exterior at once, from the weather barrier behind the walls to the flashing where roofs meet siding. Below, we walk through the parts of this project that matter most for homes in Traverse City and across Northern Michigan.

Siding Replacement Is More Than New Panels

The panels are the part everyone sees. But a proper replacement includes everything behind and around them:

  • Removing the old siding down to the sheathing.
  • Checking for soft or rotted wood and replacing it before anything new goes on.
  • Installing a fresh weather-resistant barrier, or housewrap.
  • Flashing every window, door and roof-to-wall joint.
  • New trim, corners, soffit and fascia so the whole exterior matches.

Skipping any of these steps is how new siding ends up hiding old problems. Once the panels are on, you won’t see a wet wall until it shows up as a stain inside or a soft spot outside.

Choosing a Lap Siding Material for Northern Michigan

Horizontal lap siding, like the profile on this home, comes in a few main materials. Each one handles our climate a little differently.

  • Vinyl siding is budget-friendly and needs very little maintenance. It won’t rot or need paint. The key is installing it so panels can expand and contract with temperature swings.
  • Engineered wood siding has a deeper shadow line and a more solid feel. It’s factory-primed or pre-finished and stands up well to impact, but cut edges must be sealed so moisture can’t get in.
  • Fiber cement siding is heavy, stable and fire-resistant. It holds paint well and doesn’t move much with temperature, but it costs more to install.

The right choice depends on your budget, the look you want, and how long you plan to stay in the home. We walk through these options during every estimate for siding installation.

White Trim That Frames Every Window and Corner

Look at the windows in this photo. Each one has a wide white trim surround, and the corners of the house have matching white corner boards. That contrast against the gray siding is what makes the exterior look sharp from the street.

Trim does more than look good. It gives the siding a clean edge to stop against, and it creates a place to seal and flash each opening. Narrow or skipped trim often leads to caulk-only joints that crack after a few winters and let water behind the wall.

On a two-story home with this many windows, consistent trim width and straight lines take careful layout. It’s one of the details that separates a finished exterior from a rushed one.

Band Boards, Roof Lines and Flashing

Halfway up this home, a small roof section runs across the first floor, with a white band board above it. Spots like this, where a lower roof meets a wall, are among the most common leak points on any house.

Every roof-to-wall joint needs step flashing tucked under the siding. Where a roof edge ends against a wall, a kickout flashing directs water into the gutter instead of down the siding. Without it, water runs behind the panels and rots the wall below, often for years before anyone notices.

Because we also handle residential roofing, we make sure the flashing ties into the shingles correctly, not just the siding.

Soffit, Fascia and Gutters Finish the Roofline

The white soffit, fascia and gutters on this home tie the roofline into the new siding. When siding gets replaced but the old soffit and fascia stay, the mismatch is obvious, and aging wood fascia keeps rotting behind gutters.

Vented soffit also helps the attic breathe. In Northern Michigan, good attic airflow reduces the warm-roof conditions that lead to ice dams in winter. Replacing soffit during a siding project is often the easiest time to improve ventilation.

Details Around Lights, Meters and Penetrations

Notice the lights beside the back door and the electric meter on the wall. Each one sits on a flat mounting block, not screwed straight through a siding panel.

Mounting blocks keep fixtures level, give a solid surface to seal against and let the siding move around them. The same goes for vents, hose bibs and dryer exhausts. These small pieces rarely get attention on an estimate, but they’re where many leaks start.

We used the same approach on a recent garage siding installation, and it’s standard on every exterior we finish.

The Bottom Edge: Clearance Above Grade

Along the base of this home, the siding stops cleanly above the soil and patio. That gap matters. Siding that runs down into dirt or mulch soaks up moisture, and snowmelt pooled against the foundation can wick up behind the panels.

The bottom course should start high enough to stay dry, with a starter strip or trim board that sheds water away from the foundation. On homes with decks or porches, the same care applies where boards meet the wall, a problem we covered in our post on peeling deck paint.

Signs Your Home Is Ready for New Siding

  • Cracked, warped or missing panels.
  • Siding that rattles or comes loose in strong wind.
  • Soft or rotted wood at window sills, corners or trim.
  • Peeling paint inside near exterior walls.
  • Mold or mildew that keeps coming back on shaded sides.
  • Heavy fading or chalky residue on the siding surface.
  • Rising heating bills with no other clear cause.

Two or more of these usually means it’s time for a professional look before the next winter.

Planning Siding and Roofing Together

If your roof is nearing the end of its life, it’s worth planning both projects together. Doing a roof replacement and new siding at the same time lets the drip edge, flashing and trim tie in correctly from the start. It also avoids pulling up new siding later to fix roof-to-wall flashing.

Whole House Siding Replacement in Traverse City and Northern Michigan

As a locally owned contractor, we inspect every home in person before recommending a siding plan. Blake checks the walls, trim, flashing, soffit and roofline, then puts together a detailed written estimate. It spells out the siding material, trim, weather barrier and flashing, so you know exactly what you’re paying for.

We replace siding across Grand Traverse County, Leelanau County, Antrim County, Benzie, Kalkaska, Wexford, Missaukee and Manistee counties. Every project is backed by our 10-year workmanship warranty.

Frequently Asked Questions

Can new siding go over old siding?

It can in some cases, but we don’t recommend it. Removing the old siding lets us check the sheathing for rot and install a new weather barrier.

Is vinyl or engineered wood better for Michigan homes?

Both work well when installed correctly. Vinyl costs less and needs almost no upkeep. Engineered wood has a heavier look and better impact resistance.

Can siding be replaced in the fall or winter?

Yes, with care. Vinyl gets stiffer in the cold, so handling and layout need extra attention. We’ll talk through timing during your estimate.

Does new siding include soffit and fascia?

It should. Replacing them together gives a matching exterior and a chance to improve attic ventilation.

Should I replace my roof and siding at the same time?

If your roof is close to replacement, doing both together lets flashing and trim tie in properly and avoids rework later.

Ready for a New Exterior?

If your siding is cracked, loose or fading, call Blake or Craig directly at (231) 392-1512, or request a free estimate. You’ll talk to the people who will actually be on your home, not a call center.

Don't forget to share this post!

Ready to
Get Started?

Call us today or request your free estimate and get expert roofing advice from a local team you can trust. We respond within 24 hours.

Get a Free Estimate

Response within 24 hours · Inspection within 1 week